RM25.00
Tool Gunprimer Custom Guide / Carving Guide Tape (Transparent Black CG-TB / Transparent Gray CG-TG)
Price RM25.00
Brand Gunprimer
Size (L x W x H) 10.5 cm x 17.5 cm x 1 cm
Availability 8
Shipping Fee
Variation No Stock
Quantity
Description

Product Description

Brand: Gunprimer (Korea Brand)

Item Code:  CG-TB / CG-TG

Item Size (L x W): 105mm x 175mm

Contents: 1 sheet each

Variation:

  1. Gunprimer Custom Guide (Transparent Black) CG-TB
  2. Gunprimer Custom Guide (Transparent Gray) CG-TG

*Kindly note that each product is sold separately. It does not come together as set.

 

Additional Information

  • A thin, free-cut guide tape sheet with a scale of 1mm.
  • It is convenient to attach it to parts, write a stripe-cut design on top of it with a mechanical pen, then paste various guide tapes onto top to engrave stripes and create multiple original panel lines of matching sizes.
  • Since the guide tape can be attached to an accurate position and the work for directly engraving the stripe from above using a needle or the like can be performed, the failure of the engraving can be prevented.
  • It is very thin and allows you to work directly by pasting it on parts as the basis of the engraving work, writing a engraving design on it, and then stretching a guide tape over it.
  • Please do the work without putting any effort into engraving by pasting the guide above.If you put too much effort into it, the custom guide may deviate and you may not be able to work correctly.
  • Please take off the oil and dust on the surface to be pasted before pasting.Also, be careful not to touch the adhesive surface as much as possible when you touch it with your fingertips.
  • For engraving, we recommend using it in combination with various other engraving tools.
  • To increase the adhesive strenght of the guide, don't forget to remove the oil from the parts before you use it. 
  • To remove oil efficiently, we recommend you to use the Recover products from Gunprimer. 
  • Gunprimer Custom Guide (Transparent Black) CG-TB
    • Recommended for dark-colored parts.
  • Gunprimer Custom Guide (Transparent Gray) CG-TG
    • Recommended for brightly colored parts.

 

·This is a video of how to use it with a custom guide and a Panel Line Ver.2 Straight Guide (sold separately).

 

What's in the box

1 x Tool Gunprimer Custom Guide / Carving Guide Tape (Transparent Black CG-TB / Transparent Gray CG-TG) (Only one unit item)

Gpaint by Studio G
Primerless Lacquer Model Paint
Use straight out of the bottle
Scratch Resistance
Primerless
Pre thinned paint and optimized for airbrush paint as well as hand painting
Primary & Metallic Series
Total of 8 colors
65ML (Good for 3-4 kits)